ROS Rack Repair System

Damaged Racking Upright Repair Services from £125 + VAT*

The revolutionary and smart pallet racking repair process!

 

Tired of the high cost and high level of disruption caused by replacing pallet racking uprights after they have become damaged or following a SEMA Rack Safety Inspection?

 

Then you may wish to consider our ROS Rack Repair System which has an incredible unique process that returns damaged racking uprights to their original form in less than thirty minutes!

 

The way your racking is repaired is extremely simple. Using a combination of a precision-formed dieand controlled hydraulic pressure, the unique tool reforms damaged racking uprights back to their original shape and strength - even whilst your pallet racking is under full pallet load!

 

Get a ROS Rack Repair quote today!

Before and after the ROS Rack Repair System process!

How does the ROS Rack Repair System work?

ROS Rack Repairs - Step 1

 

Step One

 

If you have an Amber repair as per the SEMA Guidelines or as highlighted in a report from a SEMA Approved Rack Inspector, then we can 100% repair the upright.

 

Only 5% of Red repairs CANNOT be repaired. The basic rule is that if there is material missing, a crack, split or tear in the upright, then it cannot be repaired.

ROS Rack Repairs - Step 2

 

Step Two

 

A bespoke, precision-engineered die (designed specifically for each major UK and Europeanmanufactured racking system) is secured to the damaged upright and controlled hydraulic pressure is applied.

 

The repair process works three dimensionally, so the front face, side walls and corners will be re-profiled.

ROS Rack Repairs - Step 3

 

Step Three

 

After the repair process is complete, the hydraulic pressure is gradually released and the precision engineered die is removed from the upright.

 

The upright is now repaired! It will have reformed to its original shape and form, with no loss of strength, fit or function. Guaranteed!

Is the ROS Rack Repair System safe and approved?

 

Yes! The process is certified to BS EN 15635 "The Application and Maintenance of Storage Equipment".

 

Over 150,000 repairs are completed annually for large corporations including Ikea, Debenhams, Coca Cola, Kuehne + Nagel, Volkswagen, Porsche, Bosch, Lidl and Philips.

 

Why not get a quote today?

The ROS Rack Repair System also has accreditations from:

 

  • DEKRA Certification GmbH, Worldwide HQ, Suttgart, Germay
    • "Our trials found that the ability of the racking to withstand the required loads remained uncompromised after repairs had been made using the ROS process. The ROS Rack Repair process is granted certification to EN 15635 - The Application and Maintenance of Storage Equipment" - Dr Walter Steffen, DEKRA Certification GmbH
  • The Dr Möll Institute of Engineering, Darmstadt, Germany
    • "No reduction of the load bearing capacity could be observed" - Dr P Stangenberg & Dr J Anders
  • Bayer Group, Bayer Technology Services, Levekusen, Germany
    • "Providing the repairs are limited to a maximum of three times, there are no indications of material fractures or weakness whatsoever" - Professor Eckstein
  • TNO Environment and Geosciences, Holland
    • "The ROS method did not result in any noticeable loss of load bearing capacity" - Dr P.E. de Winter
Dekra BS EN 15635 ROS Racking Repair System

Furthermore, the system is insured by Lloyds of London with industry-leading levels of insurance cover including £10million Employers Liability, £5million Products Liability and £5million Public Liability.

If you have racking repairs that need to be carried out, contact us to get a quote. You can even upload your recent rack safety inspection report for us to provide a quotation from!

* £125+VAT based on the minimum of 10 repairs being carried out at a total £1250+VAT. All subsequent repairs £125+VAT per upright.
80% cost saving when compared to traditional replacement methods involving new materials, scissor lift, SEIRS installation and forklift. Traditional replacement methods from £450+VAT.