A fully integrated solution: Office mezzanine floor and warehouse fit-out
Expert Installations were in the process of moving to a larger facility having outgrown their existing premises, and so enlisted SEC to design, supply and install a joint storage and interiors solution that would both maximise warehouse capacity and create additional office space.
A mezzanine floor was the primary solution for maximising area; to do this, SEC looked to make holes in the existing plasterboard office ceiling to facilitate the installation of the proposed mezzanine floor. Once the floor and column casings were installed, SEC then re-instated the plasterboard ceilings - taping, jointing and then repainting the whole of the office and kitchen areas to make good.
Stud partitioning was then used to seperate and create a new meeting room area and private office space below. HVAC systems and lighting were also installed along with suspended ceilings throughout the new office space.
Carpet tiles were supplied and flooring layed throughout the new areas, whilst the existing single door and adjacent window was removed to make way for new oak veneer double doors. Out on the warehouse floor, SEC looked to install multiple bays of pallet racking, configured to varying heights dependent on the allowance of vertical space in key areas of the warehouse.
A new pallet gate loading system was also positioned atop the mezzanine floor, with both solutions optimising loading and storage capabilities throughout.